46
LE-3xx/LE-4xx Hardware Installation & User Guide
R
ESET
B
UTTON
3.
The device will then begin System shutdown, which could take as long as 2 minutes
if the system is busy, during which time the Power LED will blink.
4.
If a system reset fails to correct the problem, a Reset to Factory Defaults can be
attempted.
To perform a reset to factory defaults:
1.
Locate the small, unmarked circular hole on the front of the chassis, found to the
right of the local management port.
2.
Carefully insert the end of a large straightened paperclip (or a similar object with
a blunt end) into the reset button hole and gently depress and hold the RESET
button inside the hole for at least 4 seconds. Do not use excessive force. The Alarm
LED will begin to blink when the button is depressed and then turn solid once the
button is released.
3.
The device will then begin System shutdown, which could take as long as 2 minutes if
the system is busy and an additional 30 seconds to restore factory defaults, during
which time the Power LED will blink.
4.
If a Reset to Factory Defaults fails to correct the problem, contact Customer
Support.
Summary of Contents for LE-310
