7
2.2 POTENZE E CONSUMI
Vedi tabella
allegati.
2.3 PRESTAZIONI DELLA MACCHINA
Vedi tabella
allegati.
2.4 PESI
Vedi tabella
allegati.
2.5 MATERIALI E FLUIDI IMPIEGATI
Le zone della macchina che possono venire a contatto con il prodotto alimentare sono realizzate con materiali atossici ali-
mentari.I fluidi frigorigeni utilizzati nelle Nostre apparecchiature sono quelli consentiti dalle attuali direttive internazionali
di tutela ambientale. ( HCFC o HFC ).
3. FUNZIONAMENTO
3.1 DESTINAZIONI D’USO, USO PREVISTO E NON PREVISTO
Le Nostre apparecchiature frigorifere sono macchine agroalimentari (DIRETTIVA MACCHINE 89/392 ),
destinate al trattamento dei
prodotti alimentari
.
IMPIEGO DEL MONOBLOCCO
Il monoblocco
è destinato
alla conservazione di derrate e/o prodotti a temperature che vanno da -20°C a +10°C.
È stato progettato
per poter lavorare con temperatura ambiente da 0°C a +43°C.
È stato progettato
per mantenere una determinata temperatura in una cella frigorifera predisposta a tale uso.
Il monoblocco
non è destinato
ad essere installato e utilizzato in una atmosfera a rischio di esplosione.
Ogni uso al di fuori di quelli consentiti viene considerato “ uso improprio “ e pertanto il costruttore ne declina
ogni responsabilità.
3.2 EVENTUALI ZONE PERICOLOSE, PERICOLI E RISCHI RESIDUI, DISPOSITIVI USATI
I monoblocchi sono stati progettati e realizzati con gli opportuni accorgimenti al fine di garantire la sicurezza e la salute
dell’utilizzatore.
RISCHI DOVUTI ALLE SUPERFICI, SPIGOLI ED ANGOLI:
I monoblocchi non presentano spigoli pericolosi, superfici affilate o elementi sporgenti dagli ingombri.
RISCHI DA CONTATTO ACCIDENTALE CON ORGANI IN MOVIMENTO:
Gli unici elementi mobili presenti nel monoblocco sono i ventilatori. Questi non presentano alcun rischio in quanto protet-
ti da griglie di protezione, fissate tramite viti.
ATTENZIONE!!
Scollegare l’apparecchiatura dalla rete di alimentazione prima di rimuovere le protezioni.
RISCHI DA INSTABILITÀ:
La stabilità dei monoblocchi sulla cella è assicurata dalla presenza di opportuni dispositivi di fissaggio (staffe,
angolari).
RISCHI DOVUTI ALLE BASSE O ALTE TEMPERATURE
In prossimità delle zone con rischio di bassa/alta temperatura sono stati applicati degli adesivi indicanti:
“ TEMPERATURE ESTREME “
I