45
Trouble
Shooting
Check Red O-ring in Manifold & Faucet Deco assembly.
- Red O-ring must not be visible/need to be inserted all the way.
Check for Mesh inside spout.
12-6-B. WATER REMAINING ON SPOUT
Symptom
Water keeps dripping from spout.
Cause of Defect
1. Assembled improperly.
2. There may be an air bubble.
3. The diameter of the spout may be defective.
AS Procedure
1) Check assembly to make sure that Red O-ring is inserted completely.
2) Check for mesh inside spout.
3) After step 1 & 2, but if water still drips, replace Dispense Button.
How to Diagnose
1
2
WATER
REMAINING
