1
2
3
4
5
This is to be performed with the power plug inserted.
Turn on the drainage switch, located at the bottom of the panel, to
remove water remaining in the system.
(When the drainage switch is turned on, water purification and ice
production stops, and “ICE FULL”, “WATER FULL”, “HOT/ECONO” LED
lights will flicker with a BEEP sound.)
Remove cold water by pressing the water dispense button. In order to
remove the water remaining in the cold water tank, tilt the product
forward and do so until cold water does not come out.
Take out the ice by pressing the ICE(ice dispense) touch sensor button.
If there is no other option but to transport the product in an inclined position, transport the product
in a backwards inclined position if at all possible.)
In a case where a product needs to be transported, please make sure that the system is completely
drained of water and ice before moving the product.
(If the product is moved without a complete drainage process as described below, it may cause serious
damage to the product).
8
Relocation/Installation Precautions
16
15
①
This is to be performed with the power plug inserted.
②
Remove the lower cover by first pushing the cover down and the
n
pulling it forward.
Turn on the drainage switch, located at the bottom of the panel
,
to remove water remaining in the system.
※I
f the drainage switch is turned on, water purification and
ice production stops.
③
Remove cold water by pressing the water dispense button.
I
n order to remove the water remaining in the cold water tank,
tilt
the product forward and do so until cold water does not come ou
t.
④
Take out the ice by pressing the
I
CE(ice dispense) touch senso
r
button.
※I
f there is no other option but to transport the product in an
inclined position, transport the product in a backwards incline
d
position if at all possible.
6-6. Draining the System for Relocation/Installation
storage house is opened and ice comes out from the dispensing h
ole.
(2) Hot Water Dispense Mode
I
f HOT(hot water selection) touch sensor button is selected and
the
water dispensing button is pressed, hot water comes out.
※I
f HOT LOCK(hot water lock) is set, then hot water does not co
me
out even though the water dispensing button is pressed.
※I
f HOT LOCK(hot water lock) function is released, the water in
the
hot water tank can be taken by selecting HOT(hot water selectio
n)
touch sensor button and pressing the water dispensing button.
(3) Cold Water Dispense Mode
I
f COLD(cold water selection) touch sensor button is selected a
nd water
dispensing button is pressed, cold water comes out.
(4) Ambient Water Dispense Mode
I
f AM
BI
(ambient water selection) touch sensor button is selecte
d and water
dispensing button is pressed, ambient water comes out.
※I
f hot water or ambient water is selected and it is not used f
or a given time
period, the system will automatically switch into cold water di
spense mode.
(Default function)
※
There is not a separate setting and release method for the use
of ambient
water/cold water/ice making operation. They operate automatical
ly as
designated by the program when the power is supplied.
Note : The flushed water from water dispensing hole is around 12
7℉(
95
℃
) and be
careful against a burn from hot water. Please use container as
like Cup.
Drainage switch
