Tr
ouble
Shooting
38
Push the Ice button to dispense Ice.
There is Ice, but no Ice is dispensing - Check Ice shape.
- Remove Front-Upper cover and disassemble the dispense tunnel to check the shape of Ice.
Comp. is working properly, but there is no Ice.
ex> One tray of Ice is made approx. every 10 minutes at 77°F
If there is a 3min difference in the interval of time of Ice making, check the Environment
sensor.
12-3-C. ENVIRONMENT SENSOR DEFECT
Symptom
1. Cold water is working properly, but there is no Ice.
2. Connect Test Board: LED22 starts blinking.
Cause of Defect
If Environment sensor recognizes that the temperature is high, it may cause the Ice to make for longer
period of time, causing the Axle Coupling Motor to malfunction.
AS Procedure
1) Check ohm reading of sensor (Resistance should be approx. 45)
2) If sensor is defective, replace sensor.
How to Diagnose
1
2
3
4
