7
Installation Precautions
15
When installing the product, do not install it at the following places.
- Wet areas
- Near a fire.
- Near flammable materials.
- Areas with direct exposure to rain and snow.
- Areas with direct exposure to sunlight.
- Near chemicals (volatile materials, organic solvents, etc.).
- Areas with temperatures below 32°F.
*When the product is installed in a dark area, the hot water system may not operate
if the power saving (ECONO) mode is set, even during the daytime. Install the unit in a bright area.
Use the following water quality range.
- Water Pressure : 7~120 psi (0.5~8.4 kgf/cm
2
)
- Water Temperature : 39 ~ 100°F (4~38°C)
- pH : 5 ~ 10
- Hardness : 300 ppm or less
- Evaporation remains : 500 ppm or less
- Water Quality : Biologically safe water quality
If you do not use water quality within the above range without prior discussion of our company, the
product can be excluded from the stated warranty period.
When transporting the product, do not tilt it over 45°.
Severe tilting can be the cause of reduced performance.
Do not connect hot water(over 100°F) to this product.
Leave approximately 8 inches, between the wall, sides and rear surfaces of the product for
proper ventilation to ensure the safe operation of the product.
When connecting the tubing hose, be sure that it is not bent or pressed down by heavy objects,
etc.
Adjust the hose so that the water discharged from the drainage hose does not splash onto the
product’s surrounding area.
Brine water, or the water coming out through drainage lines, can easily be applied towards other wa-
ter related needs, such as in bathroom cleaning, house cleaning laundering, washing, etc. in order to
prevent waste of water. However, never use the brine water as drinking water or for cooking of food.
Raising the brine water and drain water over 1 ft. above the installation surface, or
connecting them over 6 ft. away from the water purifier can hinder a smooth drainage
process. In order to install the product in at a location where the brine water and drained
water line are located at a distance of over 6 ft. from each, the user must install a separate
drainage pump.
the water is derived from the same installation source, prepare an independent drain line for
each product.
8
