Chrysler Cruiser PT 2010 Owner'S Manual Download Page 129

Page: 129 / 398

2. Pull the release lever located on the outboard side of
the seat. Lift up the seat and tumble the seat forward.

3. Lift up the release levers to disengage the seat from the
floor attachments.

4. Using the handle on the seat, the seat assembly can
now be lifted and removed from the vehicle.

NOTE:

Small rollers on the bottom of the folded seat

and a handle at the top allow the seat to be easily moved
when removed from the vehicle.

Tumbling Seat Release Strap

Release Lever Location

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

129

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Search results

Summary of Contents for Cruiser PT 2010

Reviews:

Related manuals for Cruiser PT 2010

Brands by name

Popular brands

Chrysler Cruiser PT 2010, Owner'S Manual

Search results

Summary of Contents for Cruiser PT 2010

Reviews:

Related manuals for Cruiser PT 2010

Brands by name

Popular brands