manualshive.com logo in svg

Chrysler Cruiser PT 2010, Owner'S Manual

The Chrysler Cruiser PT 2010 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides owners with detailed instructions and valuable information about their vehicle. Download the manual today and unlock the full potential of your Chrysler Cruiser PT 2010.

Share
Download
background image

WARNING!

Overloading of your tires is dangerous. Overloading
can cause tire failure, affect vehicle handling, and
increase your stopping distance. Use tires of the
recommended load capacity for your vehicle. Never
overload them.

TIRES — GENERAL INFORMATION

Tire Pressure

Proper tire inflation pressure is essential to the safe and
satisfactory operation of your vehicle. Three primary
areas are affected by improper tire pressure: Safety,
Economy, and Ride Comfort and Vehicle Stability.

Safety

WARNING!

•

Improperly inflated tires are dangerous and can
cause accidents.

•

Under-inflation increases tire flexing and can re-
sult in over-heating and tire failure.

•

Over-inflation reduces a tire’s ability to cushion
shock. Objects on the road and chuckholes can
cause damage that result in tire failure.

•

Over-inflated or under-inflated tires can affect
vehicle handling and can fail suddenly, resulting
in loss of vehicle control.

•

Unequal tire pressures can cause steering prob-
lems. You could lose control of your vehicle.

(Continued)

5

STARTING AND OPERATING

257

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cruiser PT 2010

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
Wilco Offroad UHG2060/AU Installation Manual preview
UHG2060/AU
Brand: Wilco Offroad Pages: 4
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Dodge Challenger 2013 Owner'S Manual preview
Challenger 2013
Brand: Dodge Pages: 543
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19

Brands by name

Popular brands

Load more brands