manualshive.com logo in svg

Chrysler Cruiser PT 2010, Owner'S Manual

The Chrysler Cruiser PT 2010 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides owners with detailed instructions and valuable information about their vehicle. Download the manual today and unlock the full potential of your Chrysler Cruiser PT 2010.

Share
Download
background image

Tapping RESUME ACCEL once will result in a 2 mph
(3 km/h) speed increase. Each time the lever is tapped,
speed increases so that tapping the lever three times will
increase speed by 6 mph (10 km/h), etc.

To decrease speed while Electronic Speed Control is ON,
pull down and hold SET DECEL. Release the lever when
the desired speed is reached, and the new speed will be
set.

Tapping the SET DECEL lever once will result in a 1 mph
(2 km/h) speed decrease. Each time the lever is tapped,
speed decreases.

To Accelerate for Passing

Depress the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

Using Electronic Speed Control on Hills

NOTE:

The Electronic Speed Control system maintains

speed up and down hills. A slight speed change on
moderate hills is normal.

Vehicles equipped with four-speed automatic transaxles
may experience a downshift to 3rd gear while climbing
uphill or descending downhill. This downshift to 3rd
gear is necessary to maintain vehicle set speed.

On steep hills a greater speed loss or gain may occur so
it may be preferable to drive without Electronic Speed
Control.

146

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cruiser PT 2010

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
FORM FIT 1303 Installation Instructions preview
1303
Brand: FORM FIT Pages: 2
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
E&G Classics Denali 1094-0185-15 Instruction Manual preview
Denali 1094-0185-15
Brand: E&G Classics Pages: 3
Metra Electronics 99-7803G Wiring Instructions preview
99-7803G
Brand: Metra Electronics Pages: 2
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666
Waeco PerfectView LCD350 Installation And Operating Manual preview
PerfectView LCD350
Brand: Waeco Pages: 36
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
AUTOTECH 10.109.405K Installation Instructions preview
10.109.405K
Brand: AUTOTECH Pages: 2

Brands by name

Popular brands

Load more brands