manualshive.com logo in svg

Chrysler Cruiser PT 2010, Owner'S Manual

The Chrysler Cruiser PT 2010 Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides owners with detailed instructions and valuable information about their vehicle. Download the manual today and unlock the full potential of your Chrysler Cruiser PT 2010.

Share
Download
background image

WARNING!

•

A lap belt worn too high can increase the risk of
internal injury in a collision. The belt forces won’t
be at the strong hip and pelvic bones, but across
your abdomen. Always wear the lap belt as low as
possible and keep it snug.

•

A twisted belt can’t do its job as well. In a
collision, it could even cut into you. Be sure the
belt is straight. If you can’t straighten a belt in
your vehicle, take it to your authorized dealer and
have it fixed.

5. Position the shoulder belt on your chest so that it is
comfortable and not resting on your neck. The retractor
will withdraw any slack in the belt.

WARNING!

•

A belt that is buckled into the wrong buckle will
not protect you properly. The lap portion could
ride too high on your body, possibly causing
internal injuries. Always buckle your belt into the
buckle nearest you.

•

A belt that is too loose will not protect you as well.
In a sudden stop you could move too far forward,
increasing the possibility of injury. Wear your seat
belt snugly.

6. To release the belt, push the red button on the buckle.
The belt will automatically retract to its stowed position.
If necessary, slide the latch plate down the webbing to
allow the belt to retract fully.

40

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cruiser PT 2010

Garmin BC 30 Owner'S Manual preview
BC 30
Brand: Garmin Pages: 2
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Mazda 1989 323 Manual preview
1989 323
Brand: Mazda Pages: 13
AddSecure Asset Light Installation Manual preview
Asset Light
Brand: AddSecure Pages: 14
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Gator ARV43M Instruction Manual preview
ARV43M
Brand: Gator Pages: 5
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180

Brands by name

Popular brands

Load more brands