Chrysler Cruiser PT 2010 Owner'S Manual Download Page 86 | Manualshive

Page: 86 / 398

background image

The radio display will be used for visual prompts from
the Uconnect™ Phone such as

⬙

CELL

⬙

or caller ID on

certain radios.

Operation

Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
menu structure. Voice commands are required after most
Uconnect™ Phone prompts. You will be prompted for a
specific command and then guided through the available
options.

•

Prior to giving a voice command, one must wait for
the beep, which follows the

⬙

Ready

⬙

prompt or another

prompt.

•

For certain operations, compound commands can be
used. For example, instead of saying

⬙

Setup

⬙

and then

⬙

Phone Pairing,

⬙

the following compound command

can be said:

⬙

Setup Phone Pairing.

⬙

•

For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command when you are asked for it. For
example, you can use the combined form voice com-
mand

⬙

Phonebook New Entry,

⬙

or you can break the

combined form command into two voice commands:

⬙

Phonebook

⬙

and

⬙

New Entry.

⬙

Please remember, the

Uconnect™ Phone works best when you talk in a
normal conversational tone, as if speaking to someone
sitting a few feet/meters away from you.

Voice Command Tree

Refer to “Voice Tree” in this section.

Help Command

If you need assistance at any prompt, or if you want to
know your options at any prompt, say

⬙

Help

⬙

following

the beep. The Uconnect™ Phone will play all the options
at any prompt if you ask for help.

86

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
84
85
86
87
88
...
»

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cruiser PT 2010

Brand: Abarth Pages: 176

Brand: RAM Commercial Pages: 12

Brand: APEXi Pages: 18

Brand: Prorack Pages: 15

Brand: Allen Sports Pages: 2

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Brand: Hella Pages: 21

Brand: Fab Fours Pages: 13

Brand: Skoda Pages: 281

GMC Yukon Denali 2005

Brand: Cadillac Pages: 456

Brand: Saab Pages: 63

Brand: R&G Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands