Chrysler Cruiser PT 2010 Owner'S Manual Download Page 251

Page: 251 / 398

Term

Definition

Maximum Inflation Pressure

The maximum air pressure to which a cold tire can be inflated. The maxi-
mum air pressure is molded onto the sidewall.

Maximum Load Rating

The load rating for a tire at the maximum permissible inflation pressure for
that tire.

Maximum Loaded Vehicle
Weight

The sum of curb weight, accessory weight, vehicle capacity weight, and pro-
duction options weight.

Normal Occupant Weight

The number of occupants a vehicle is designed to seat multiplied by 150 lbs
(68 kg).

Occupant Distribution

Designated seating positions.

Passenger (P-Metric) Tire

A tire used on passenger cars and some light duty trucks and multipurpose
vehicles.

Radial Ply Tire

A pneumatic tire in which the ply cords that extend to the beads are laid at
90 degrees to the centerline of the tread.

Recommended Inflation Pres-
sure

Vehicle manufacturer’s recommended tire inflation pressure as shown on the
tire placard.

Rim

A metal support for a tire and upon which the beads are seated.

Sidewall

The portion of a tire between the tread and the bead.

STARTING AND OPERATING

251

Summary of Contents for Cruiser PT 2010















































































































































































































































































































































































































Search results

Summary of Contents for Cruiser PT 2010

Reviews:

Related manuals for Cruiser PT 2010

Brands by name

Popular brands

Chrysler Cruiser PT 2010, Owner'S Manual

Search results

Summary of Contents for Cruiser PT 2010

Reviews:

Related manuals for Cruiser PT 2010

Brands by name

Popular brands