Chrysler 2016 Town & Country Owner'S Manual Download Page 210 | Manualshive

Page: 210 / 733

background image

CAUTION!

The storage bin cover must be locked and flat to
avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched.

•

Do not drive the vehicle with the storage bin covers
open.

•

Keep the storage bin covers closed and latched
while the vehicle is in motion.

•

Do not use a storage bin latch as a tie down.

To Unstow Second Row Seats

1. Pull up on the storage bin latch to open the cover.

2. Pull up on the strap to lift the seat out of the storage

bin and push the seat rearward to latch the seat
anchors.

3. Lift the seatback to the full upright position.

4. Return the head restraint to its upright position, close

the storage bin cover and slide the storage bin locking
mechanism to the “Unlocked” position.

WARNING!

•

In a collision, you or others in your vehicle could
be injured if seats are not properly latched to their
floor attachments. Always be sure the seats are
fully latched.

(Continued)

208

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
208
209
210
211
212
...
»

Summary of Contents for 2016 Town & Country






























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Town & Country

Green Motion Building

Brand: Eaton Pages: 12

Brand: UltraGauge Pages: 55

Brand: Trailboss Pages: 5

Brand: WABCO Pages: 48

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Whispbar Pages: 14

Brand: Oldsmobile Pages: 354

Brand: E&G Classics Pages: 4

Brand: PUTCO Pages: 2

Brand: Yakima Pages: 12

Brand: J. Strong Pages: 2

Brand: Yakima Pages: 11

2011 Camry SE V6

Brand: Toyota Pages: 33

Brand: Jaeger Pages: 11

Brand: ATS Pages: 12

Brand: Audi Pages: 4

Brand: Thule Pages: 15

Brand: DICE Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands