Chrysler 2016 Town & Country Owner'S Manual Download Page 111

Page: 111 / 733

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s

weight of the child restraint) for using the

LATCH anchorage system to attach the

child restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until

the combined weight of the child and the

child restraint is 65 lbs (29.5 kg). Use the

seat belt and tether anchor instead of the

LATCH system once the combined weight

is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the seat

belt be used together to attach a rear-

facing or forward-facing child restraint?

Do not use the seat belt when you use the

LATCH anchorage system to attach a rear-

facing or forward-facing child restraint.

Can two child restraints be attached using

a common lower LATCH anchorage?

Never “share” a LATCH anchorage with

two or more child restraints. If the center

position does not have dedicated LATCH

lower anchorages, use the seat belt to in-

stall a child seat in the center position next

to a child seat using the LATCH anchor-

ages in an outboard position.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

109

Summary of Contents for 2016 Town & Country





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Town & Country

Reviews:

Related manuals for 2016 Town & Country

Brands by name

Popular brands

Chrysler 2016 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2016 Town & Country

Reviews:

Related manuals for 2016 Town & Country

Brands by name

Popular brands