Chrysler 2016 Town & Country Owner'S Manual Download Page 365 | Manualshive

Page: 365 / 733

background image

than one message to step through the remaining
stored messages. Pushing the

BACK

button takes you

back to the Main Menu.

Keyless Enter-N-Go Display — If Equipped

When the ENGINE START/STOP button is pushed to
change ignition switch position, current ignition status
will be displayed in the lower right corner of the EVIC
display to the right of the odometer value.

Refer to “Keyless Enter-N-Go” in “Starting And Operat-
ing” for further information.

Compass / Temperature Display

The compass readings indicate the direction the vehicle is
facing. The EVIC will display eight or fifteen compass
readings and the outside temperature.

NOTE:

The system will display the last known outside

temperature when starting the vehicle and may need to
be driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect the
displayed temperature; therefore, temperature readings
are not updated when the vehicle is not moving.

Automatic Compass Calibration

This compass is self-calibrating, which eliminates the
need to manually reset the compass. When the vehicle is
new, the compass may appear erratic until it is calibrated.
You may also calibrate the compass by completing one or
more 360–degree turns (in an area free from large metal
or metallic objects). The compass will now function
normally.

NOTE:

A good calibration requires a level surface and

an environment free from large metallic objects such as
buildings, bridges, underground cables, railroad tracks,
etc.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

363

«
...
363
364
365
366
367
...
»

Summary of Contents for 2016 Town & Country






























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Town & Country

Brand: ZAPTEC Pages: 240

Brand: Kolpin Pages: 25

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: U & Me Brothers Pages: 6

Brand: Acura Pages: 2

Brand: Inbay Pages: 20

S90 - ACCESSORY PANEL

Brand: Volvo Pages: 166

Brand: r.LiNK Pages: 20

Brand: Needit Pages: 2

KIT ParkingSensor 814

Brand: Gemini Pages: 6

Brand: Lund Pages: 12

Brand: Setma Pages: 13

Brand: Quadratec Pages: 8

Brand: Lincoln Pages: 370

DELTA HF integrale

Brand: Lancia Pages: 101

Brand: Vauxhall Pages: 215

Brand: Front Runner Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands