Chrysler 2016 Town & Country Owner'S Manual Download Page 517 | Manualshive

Page: 517 / 733

background image

unless braking is no longer desired. Once the brake pedal
is released, the BAS is deactivated.

WARNING!

The Brake Assist System (BAS) cannot prevent the
natural laws of physics from acting on the vehicle,
nor can it increase the traction afforded by prevailing
road conditions. BAS cannot prevent collisions, in-
cluding those resulting from excessive speed in
turns, driving on very slippery surfaces, or hydro-
planing. The capabilities of a BAS-equipped vehicle
must never be exploited in a reckless or dangerous
manner, which could jeopardize the user’s safety or
the safety of others.

Hill Start Assist (HSA)

The HSA system is designed to mitigate roll back from a
complete stop while on an incline. If the driver releases

the brake while stopped on an incline, HSA will continue
to hold the brake pressure for a short period. If the driver
does not apply the throttle before this time expires, the
system will release brake pressure and the vehicle will
roll down the hill as normal.

The following conditions must be met in order for HSA to
activate:

•

The feature must be enabled.

•

The vehicle must be stopped.

•

Park brake must be off.

•

Driver door must be closed.

•

The vehicle must be on a sufficient grade.

•

The gear selection must match vehicle uphill direction
(i.e., vehicle facing uphill is in forward gear; vehicle
backing uphill is in REVERSE gear).

5

STARTING AND OPERATING

515

«
...
515
516
517
518
519
...
»

Summary of Contents for 2016 Town & Country






























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Town & Country

Brand: Acdeos Pages: 38

Brand: RaceChip Pages: 12

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

Brand: Porsche Pages: 195

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

Brand: Prorack Pages: 14

Brand: MAXWORKS Pages: 7

Brand: ULTIMATE SPEED Pages: 6

Brand: Improved Racing Pages: 17

Brand: Alphasonik Pages: 8

Brand: NavLinkz Pages: 23

Brand: Horn Tools Pages: 12

Brand: Mobileye Pages: 29

Brand: Porsche Pages: 127

Brand: Setma Pages: 13

Brand: DICE Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands