Chrysler 2016 Town & Country Owner'S Manual Download Page 294

Page: 294 / 733

Pull up on the storage bin latch to open the cover. Slide
the storage bin locking mechanism to the

⬙

unlocked

⬙

position to allow greater access to the storage bin.

CAUTION!

The storage bin cover must lay flat and be locked to
avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched.

•

Do not drive the vehicle with the storage bin covers
open.

•

Keep the storage bin covers closed and latched
while the vehicle is in motion.

(Continued)

WARNING!

(Continued)

•

Do not operate the storage bin covers while the
vehicle is in motion.

•

Do not use a storage bin latch as a tie down.

Storage Bin Safety Warning

Carefully follow these warnings to help prevent personal
injury or damage to your vehicle:

WARNING!

•

Always close the storage bin covers when your
vehicle is unattended.

(Continued)

292

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2016 Town & Country





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Town & Country

Reviews:

Related manuals for 2016 Town & Country

Brands by name

Popular brands

Chrysler 2016 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2016 Town & Country

Reviews:

Related manuals for 2016 Town & Country

Brands by name

Popular brands