Chrysler 2016 Town & Country Owner'S Manual Download Page 55 | Manualshive

Page: 55 / 733

background image

To avoid unintentional operation of the power sliding
doors from the rear seats, push the power sliding door
master lock button, located in the overhead console, to
disable the switches and handles for the rear seat passen-
gers.

NOTE:

•

The power sliding side door switches will not open the
power sliding door if the gear selector is in gear or the
vehicle speed is above 0 mph (0 km/h). To close the
power sliding door with the gear selector in gear and
vehicle speed at 0 mph (0 km/h), the brake must be
pushed.

•

If anything obstructs the power sliding side door while
it is closing or opening, the door will automatically
reverse to the closed or open position, provided it
meets sufficient resistance.

•

If the power sliding side door is not in the full open or
close position, it will fully open when a power sliding
door switch is pushed. To close the door, wait until it
is fully open and then push the switch again.

•

If the power sliding door encounters multiple obstruc-
tions within the same cycle, the system will automati-
cally stop, the power sliding door motor will make a
clicking sound until the door has no further move-
ment. This clicking sound can be stopped by pulling
the inside or outside handle. If this condition occurs,
no damage is done to the power sliding door motor.
The power sliding door must be opened or closed
manually.

WARNING!

You, or others, could be injured if caught in the path
of the sliding door. Make sure the door path is clear
before closing the door.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

53

«
...
53
54
55
56
57
...
»

Summary of Contents for 2016 Town & Country






























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 Town & Country

Brand: Ranger design Pages: 6

Brand: JETBAG Pages: 44

Brand: Front Runner Pages: 5

Brand: GMC Pages: 425

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: V8 equipment Pages: 17

Brand: Safe Fleet Pages: 11

Brand: Camec Pages: 19

Brand: MAXWORKS Pages: 7

Brand: Dometic Pages: 158

Brand: Xblitz Pages: 30

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

Brand: Scion Pages: 24

Brand: DriveRight Pages: 16

Brand: Cadillac Pages: 20

Brand: SilverLeaf Electronics Pages: 16

Brand: Ratio Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands