Chroma 69200-1, User Manual

Page: 38 / 86

Charge/Discharge Controller 69200-1 User’s Manual
3-14
Command Description
BATTery:BCH Set the battery simulator BCH parameters. (float) Unit: %.
BATTery:BCH? Query battery simulator BCH setting value.
BATTery:BCL Set the battery simulator BCL parameters. (float) Unit: %.
BATTery:BCL? Query battery simulator BCL setting value.
BATTery:BVH Set the battery simulator BVH parameters. (float) Unit: V.
BATTery:BVH? Query battery simulator BVH setting value.
BATTery:BVL Set the battery simulator BVL parameters. (float) Unit: V.
BATTery:BVL? Query battery simulator BVL setting value.
BATTery:VH Set the battery simulator VH parameters. (float) Unit: V.
BATTery:VH? Query battery simulator VH setting value.
BATTery:VL Set the battery simulator VL parameters. (float) Unit: V.
BATTery:VL? Query battery simulator VL setting value.
BATTery:EFFCHG
Set the battery simulator EFFCHG parameters. (float) Unit:
%.
BATTery:EFFCHG? Query battery simulator EFFCHG setting value.
BATTery:EFFDSG
Set the battery simulator EFFDSG parameters. (float) Unit:
%.
BATTery:EFFDSG? Query battery simulator EFFDSG setting value.
BATTery:BOH Set the battery simulator BOH parameters. (float) Unit: %.
BATTery:BOH? Query battery simulator BOH setting value.
BATTery:BOL Set the battery simulator BOL parameters. (float) Unit: %.
BATTery:BOL? Query battery simulator BOL setting value.
BATTery:VOH Set the battery simulator VOH parameters. (float) Unit: V.
BATTery:VOH? Query battery simulator VOH setting value.
BATTery:VOLP Set the battery simulator VOL parameters. (float) Unit: V.
BATTery:VOLP? Query battery simulator VOL setting value.
BATTery:CURVe Load the battery simulator curve.
BATTery:CURVe:STATe? Query battery simulator curve status.
PROCess:TIME:STATe Set count for execution time on, off or clear.
PROCess:TIME:STATe? Query the count mode of execution time.
SCPI Commands Description
Command Parameter Description
*IDN None Read 69200-1 information.
Syntax: *IDN
Parameter: None
Return Value: Chroma 69200-1,S/N:000000000000,MAIN:01.00,HW:01.00
Command Parameter Description
CHAN:SOUR Channel Number Set active output channel.
Syntax: CHANnel:SOURce
Parameter: 1
Return Value: None
Command Parameter Description
CHAN:SOUR? None Query active control channel.
Syntax: CHAN:SOUR?