Chroma 69200-1, User Manual

Page: 41 / 86

Installation
3-17
Command Parameter Description
SPEC:CR:HIGH? None
Query device maximum resistance value in CR
mode. Unit (Ω).
Syntax:
SPEC:CR:HIGH?
Parameter: None
Return Value: 6000.000
Command Parameter Description
SPEC:CR:LOW? None
Query device minimum resistance value in CR
mode. Unit (Ω).
Syntax:
SPEC:CR:LOW?
Parameter: None
Return Value: 0.150
Command Parameter Description
SOURce:ALL
Type
Unsigned integer. Charge/Discharge control
mode.
CCC: CC Charge
CVC: CV Charge
CPC: CP Charge
CCD: CC Discharge
CVD: CV Discharge
CPD: CP Discharge
Cutoff Time
Unsigned integer. Set the cutoff time parameters.
Unit (Sec). Range 0 to 65535
Voltage Setting
Value
Float. Set the voltage parameters. Unit (V). There
are three decimal points. Range based on
machine specifications.
Current Setting
Value
Float. Set the current parameters. Unit (A). There
are three decimal points. Range based on
machine specifications.
Power Setting
Value
Float. Set the power parameters. Unit (W). There
are three decimal points. Range based on
machine specifications.
Voltage Cutoff
Value
Float. Set the cutoff voltage parameters. Unit (V).
There are three decimal points. Range based on
machine specifications.
Current Cutoff
Value
Float. Set the cutoff current parameters. Unit (A).
There are three decimal points. Range based on
machine specifications.
Current Slew Rate
Float. Set the current slew rate parameters. Unit
(A). There are three decimal points. Range based
on machine specifications.
Syntax: SOURce:ALL
Parameter: CCC,12,10.003,5.001,50.025,20.000,3.000,0.100
Return Value: None
Command Parameter Description
SOURce:ALL? None Query all the setting parameter values.
Syntax: SOURce:ALL?
Parameter: None
Return Value: CCC,12,10.003,5.001,50.025,20.000,3.000,0.100