Operation
Mirage WQ-L User Manual
44
020-101372-01 Rev. 1 (04-2014)
1. From the Main menu, select ArrayLOC > Array Color Target.
2. From the Target Color Space drop-down list, select a user-defined color space. Once selected
the last saved red/green/blue/xy values associated with the selection are displayed.
3. Target Red x/y, Target Green x/y, Target Blue x/y displays the color values associated
with the selected target color space. Only values for user defined color spaces (User 1 through
4) can be changed. Changes to these values update the associated color space chromaticity.
To
use another color space as a starting point, select a source color space from the Copy Color
Space From list. When Target Color Space is set to Maximum, the values reflect a color
space larger than capable for the best array color saturation. The values may not reflect real-
world colors
4. To set the white point for the array using one of the following methods:
• Select a user-defined white point from the Select White Point drop-down list. Changing
this option un checks
the Set White to Color Temperature check box and updates the
Target White x/y values and the White Color Temperature.
Target White x/y displays the white x/y values associated with the Select White
Point option. Only values for user defined white points (User White 1 through 4) can be
changed. When Set White Color to Color Temperature is checked, the values are
calculated based on the specified White Color Temperature.
• Check the Set White to Color Temperature check box to recalculate Target White x/
y values based on the specified standard White Color Temperature. This option is
available only when Select White Point is set to one of the user-defined options, User
White 1 through 4. This option is unchecked automatically when you change the Select
White Point option.
5. From the Copy Color Space From drop-down list select a user-defined color space. The
Target Red x/y, Green x/y, Blue x/y values are updated based on the color space selected
from the list. This option is available only when Target Color Space is set to one of the user-
defined options, User 1 though 4.
6. To adjust the target brightness for the array, adjust RGB Brightness Target on the master
projector. For maximum brightness, set the value to a large number, such as 40,000.
7. If the array appears matched across all projectors for color and brightness, color setup is
complete.
If further adjustment is required, see
Fine-tune Whites, White Brightness, or Primary Colors
i
• ColorLOC Status displays ColorLOC warnings and errors.
• Array Capability indicates the current projector capability with respect to the selected color
target and the target white point. The information format is:
• R/G/B: Indicates the percentage achieved of the red, green, and blue target gamut.
• W: Indicates the percentage achieved of the product of the RGB brightness, and the target
brightness.
i
Copy White Point From updates the Target White x/y values based on the white point
selected from the list. This option is available only when the Select White Point option is set
to one of the user-defined options, User White 1 through 4.
