INSTALLATION & SETUP
DLV 1280 User's Manual
2-13
The Composite Video and S-Video inputs provide simultaneous connection of a
composite video source (
VID 1
) and an S-Video source (
VID 2
) to the projector.
For each video input, use the corresponding audio input/output as shown.
If you have a composite video source, connect it to the projector’s rear input
panel using the extreme left composite BNC connector labeled
VID 1
. See Figure
2-15.
Figure 2-15. Connecting a Composite Video Source
VID 1 AUDIO:
To control audio levels in an audio/visual system, connect pre-
amplified (line level) audio inputs to the left and right audio inputs labeled
VID 1
.
Then connect the audio outputs (
AUDIO OUT
) to external audio amplification
equipment. All audio connection cables require standard RCA-type plugs.
If you want to connect an extra composite video source, connect to
DAT 1
using
the green BNC connector (labeled “
G
”) and use
DAT 1 AUDIO
. See Figure 2-16.
Figure 2-16. Connecting an Extra Composite Video Source
Composite Video
'
Input
Extra Composite Video
'
Input