OPERATION
DLV 1280 User's Manual
3-7
projector on and off unnecessarily — each striking of the lamp significantly
reduces lamp life.
Dat 1
Press
to select and display the input connected to
DAT 1
on the projector
(data input). Note that if a switcher is connected to Dat 1, the source on the last
selected switcher/slot will be displayed.
Dat 2
Press
to select the input connected to
DAT 2
on the projector (data input).
Vid 1
Press
to select the input connected to
VID 1
on the projector (normally
composite video). Note that YCrCb video (component video) connected to the
video inputs also responds to
VID 1.
Vid 2
Press
to select the input connected to
VID 2
on the projector (normally S-
Video, also known as SVHS).
VID 2
cannot select any YCrCb video (component
video) that may be connected to the video inputs—use
VID 1
.
Source
Press
to select a source or channel Note that the precise method you use
depends on which option (from within the Preferences menu) you have chosen
for the
key. You can choose to enter the switcher and slot number for a
source location when you press
(this is the default), or you may prefer to
see a scrollable list of channels when you press
, or you may want to enter
the 2-digit channel number representing a source setup. See Preferences for
details.
Standby
Press
to blank the display and mute the audio output while keeping the
projector in a warmed-up and ready state (standby). Note that everything remains
ON even though the screen turns to black. If menus are up when you press
,
the projector first leaves the menu system, then goes into the standby state. To
leave standby, press
again, or
.
Menu
Press
at any time to display the main menu list of eight function menus.
Press
again (or
) to return to presentation level.
Enter
Press
to select and accept a highlighted item, display a pull-down list,
toggle an on/off option, or to save an adjustment and return to the menu.
Exit
Press
to return to the previous menu level.
NOTES: 1)
does not save changes within text editing boxes or pull-down
lists, where it functions as an “escape” (cancel). For example, if you are moving