OPERATION
DLV 1280 User's Manual
3-11
Press
at any time to access the Main menu. This menu lists all function
menus.
In the Main menu, use the arrow keys to highlight the function menu you wish to
access, then press
to display it. Or, for quicker access with less manual
scrolling, simply enter the number of the desired menu. For example, enter
(in the Main menu) for Image Settings or
for Preferences. The desired
function menu will appear.
Function menus are accessed through the Main menu. They are Auto Setup,
Image Settings, Horizontal Settings, Vertical Settings, Preferences, Channel
Setup, Service, and Status.
Once in a function
menu (such as
Preferences, left),
use the arrow keys to
move the highlight to
a desired option.
Then press
to
select it. Or simply
press the appropriate
number key for
quicker access to any
numbered menu item.
If a menu is longer
than a single page
(indicated by the
presence of a scroll
bar on the right side), use
to go the next page and
to return to the previous.
If items are locked out or do not pertain to the current action, the highlight will
skip over them and you cannot select them, although they remain in the list. If
there is no signal present all source-dependent adjustments are disabled. Also
note that after 15 minutes of inactivity, a function menu disappears and the
projector returns to presentation level.
When you are finished with a function menu, do one of the following:
•
Press
to return to the previous menu level (usually the main menu).
•
Press
to accept any changes made and return to the main menu.
Main Menu
'
Figure 3-5. Using the Main Menu
Function Menus
'
Figure 3-6. Sample Function menu
