Section 4: OPERATION
GS Series User Manual
020-000724-02 Rev. 1 (10-2015)
4-29
4.10
Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to
be displayed on the network display through Ethernet, USB, or wireless
transports. It can adapt to different network settings (DHCP, fixed IP, and direct
link by USB/Ethernet cable).
Christie Presenter can be downloaded from the Christie website or from the
web page of the projector.
4.10.1 Connect to the Projector
1. Connect to the projector using WiFi or Ethernet
-
Ethernet connection:
Determine the projector's IP address from the menu Main Menu >
Configuration > Communications > LAN
Configure your PC IP address to be on the same network as the
projector.
The projector and computer must be connected directly or over the
network via Ethernet.
-
WiFi Wireless connection:
Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on
the projector input panel.
Insert the WiFi USB dongle
LAN
1. DHCP
2. IP Address
3. Subnet Mask
4. Default Gateway
5. MAC Address
K
HDBaseT
REMOTE
IN
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
MINI USB
ETHERNET
CVBS
S-VIDEO
REMOTE
OUT
HDMI
VGA IN
VGA OUT
DISPLAY PORT
DVI
