Section 4: OPERATION
GS Series User Manual
020-000724-02 Rev. 1 (10-2015)
4-25
• Restart
Network
Execute a Network restart. This will not change any of the network settings.
•
Network Factory Reset
Execute a network factory reset. Network settings will be reset to the
following default values:
-
Projector Name = Christie@ + Serial Number
-
Show Network Messages = ON
-
LAN Settings:
-
Manual
-
IP Address = 192.168.0.100
-
Subnet Mask = 255.255.255.0
-
Default Gateway = 192.168.0.100
-
WLAN Settings:
-
Enabled
-
Start IP = 192.168.1.100
-
End IP = 192.168.1.120
-
Subnet Mask = 255.255.255.0
-
Default Gateway = 192.168.1.100
-
SNMP Settings:
-
SNMP Read Communication = private
-
Trap IP Address = 0.0.0.0
-
SMTP IP Address = 0.0.0.0
-
All other settings are cleared/blanked
-
Trap Configuration:
-
All items = SNMP Trap + Email
•
LAN Setting Panel
-
Select if the projector must obtain an automatically assigned IP address
through DHCP or if the user will set the address manually.
-
Enter the IP address, netmask, and default gateway address for the
TCP/IP setting.
•
WLAN Setting Panel
-
Select if the wireless LAN of the projector is enabled or disabled.
