Freeze-dryer Epsilon 2-10D LSCplus
4 Storage and transport
44 / 161
Version 07/2022, Rev. 3.0 of 20/07/2022
• sb
Translation of the original operating manual
→
4.3
Unpacking the freeze-dryer
WARNING
General risk of injury
Among the general hazards when unpacking or during the transport of the
freeze-dryer are impact hazards, crushing hazards, grazing hazards,
cutting hazards, etc.
This may lead to severe injuries.
• Comply with the fundamental health and safety rules and regulations
as well as with the rules and regulations for the prevention of
accidents!
• Wear personal protective equipment (safety shoes, work gloves, and
hardhat)!
DANGER
Risk of injury caused by the uncontrolled movement of loads
Freeze-dryer components that are not properly fastened or secured may
shift, or fall over.
• Take the centre of gravity of the load in consideration (off-centre)!
• Prior to transporting the freeze-dryer, read this chapter of the
operating manual thoroughly!
CAUTION
The freeze-dryer Epsilon 2-10D LSCplus weighs approx. 665 kg!
The freeze-dryer is packaged in a wooden crate.
• After opening the packaging, take out the accessories.
• Remove the packaging material.
• Remove the side walls of the crate.
• Lift the freeze-dryer upwards with a lifting device.
• Retain the packaging for any possible future transport of the freeze-
dryer.
→
