Section 3: Operation
Mirage S+/HD, Matrix S+/HD, Christie HD/DS+/DW, DLV User Manual
3-27
020-100001-05 Rev. 1 (12-2008)
VIDEO STANDARD:
For all but the more unusual video
standards available in the world, the projector automatically
detects the incoming horizontal and vertical frequencies and
sets the projector’s processing of this signal to the
corresponding standard. The current video standard name
appears in the
Video Options
submenu, and includes an “A” if
it has been auto-detected. Press
to view or select a
different video standard from those available to the
projector—any that are disabled have frequency
characteristics that differ from those of the incoming signal. Selecting a specific
standard forces the projector to process the signal according to this standard.
NOTE:
Best results are obtained with defined channels. Otherwise, switching from
one video source to another can sometimes cause slight disturbances in the display,
indicating that the Auto function is struggling. Recover by briefly selecting a different
video standard, then going back
.
Table 3.3. Regions and Video Standards: Summary
Standard
Where Used
(SUBJECT-TO-CHANGE
)
NTSC
N. America and Japan
NTSC 4.43
A tape-only standard for partially-translated hybrid signals
PAL
Most of Europe, China, Australia, some of S. America, some of Africa
PAL-M
Brazil
PAL-NC
Argentina, Chile, other Latin American countries
PAL 60
SECAM France, Eastern Europe, most of Africa
NOTE:
Generally, use “Auto” for all instances EXCEPT:
1)
a poor quality input
signal or
2)
a black-and-white video signal. In order to detect and display such
signals, select the relevant standard from the list.
INPUT VIDEO BLACK:
This control
compensates for incoming elevated black
levels present in certain video signals, and
ensures that blacks in the display are
neither crushed (i.e., where dark grays appear black) nor excessively elevated (i.e.,
where blacks appear dark gray). By default, the projector automatically determines the
best setting according to the type of incoming video signal:
•
0 IRE
– Used for DVD output with “enhanced black”, SECAM, most PAL
standards, and Japanese NTSC.
•
7.5 IRE
– Used for most NTSC video signals.
For some types of video, you can override the setting. The control is disabled for other
types of video (and all graphics sources). Generally, if black appears crushed when
brightness = 50, choose “0 IRE”. If black appears excessively elevated, use “7.5 IRE”.
COLOR:
This slide bar adjusts the color saturation level, i.e., the
amount
of color in a
video image. Lower settings produce less saturated colors — for example a setting of
“0” produces a black and white image. If the color level is too high, colors will be
overpowering and unrealistic.
TINT:
This slide bar adjusts the red/green color hue for true color reproduction of
video and HDTV signals connected to Input 3 or 4. For best results, adjust tint while
