Section 4: Maintenance
Mirage S+/HD, Matrix S+/HD, Christie HD/DS+/DW, DLV User Manual
4-9
020-100001-05 Rev. 1 (12-2008)
NOTE:
If you can’t turn the lamp lock into position, it is likely the lamp is not
fully inserted. In this case, partially remove the lamp and try pushing it back in
again. Then, try switching the lock lever to the “lock” position.
8.
REPLACE THE LAMP DOOR
Replace the lamp door and secure it with the two (2) screws removed in Step 2.
IMPORTANT:
The lamp module is calibrated for maximum performance and
brightness in this projector. Do not attempt to re-align or adjust the lamp module.
9.
RECORD THE SERIAL NUMBER OF THE NEW LAMP
•
Plug in the projector and power it up.
•
In the Lamp menu, select “Change Lamp”.
•
In the Lamp S/N text box, enter the serial number.
•
Press to record the number and to reset the lamp timer. The timer will now
begin to log time for the new lamp.
1.
2.
3.
4.
5.
6.
7.
8.
Lamp Hours
Lamp S/N
Lamp Message
Lamp Limit
Lamp Mode
Power
Intensity
Optical Aperture
Lamp History
Change Lamp
Lamp
0
?
1000
Power
500
0
3
Lamp S/N
S/N
5679
1234
Hours
1001
0
Lamp History
New serial# entry
automatically updates
Lamp History...
...and resets Lamp
Hours to “0”
IMPORTANT:
If you neglect to enter a serial number, the lamp timer will not
reset to “0” and will therefore be inaccurate. The lamp life limit may then expire
prematurely.
