8
2.3 Safety instructions
The hydraulic tool kit is strictly approved
only for the purposes intended by the
manufacturer.
Only genuine accessories may be used. Use
of non-genuine tools or accessories presents
a major safety hazard.
Ensure that only trained and instructed
personnel use the equipment!
Use of the equipment by personnel that have
not been trained and instructed is prohibited.
Ensure that the instruction manual is made
available to operating personnel.
Observe the applicable national regulations
for accident prevention.
Do not use any hoses or fittings that are not
permitted for the equipment's operating
pressure.
Because metallic parts can break up and
fly off with high energy if the tool is faulty
or operated incorrectly, protective gloves
and a face mask must strictly be worn for all
applications of the equipment.
As a result, there is a risk of severe physical
injury! See also ANSI Z87.1-1989.
Never throw the tool or allow it to fall.
Never misuse the tool or lend it to untrained
personnel.
The tool must only be used in ambient
temperatures of above 5°C (41°F) and up to a
maximum of 50°C (122°F).
The tool must never be used in potentially
explosive areas.