![background image](http://html.mh-extra.com/html/chief/pnp-90-un-2-0/pnp-90-un-2-0_instruction-manual_2601093022.webp)
4.5.1
4.5.2
4.5.3
4.5.5
4.5.4
22
4.5 Connecting the Tool to the Hydraulic Actuator
Warning!
The mounting adaptor on the hydraulic
actuator must be clean and free from
damage!
The locking bolts must also be free from
contamination and damage.
The mounting hole in each tool must be
free from contamination and damage!
Warning!
Damaged or defective locking pins must
not be used!
4.5.1/4.5.2
Select tool and prepare locking pins. The tool is carefully
pushed onto the mounting adapter by the mounting
hole. The indexing pin in the mounting adaptor must
engage in the corresponding slots in the mounting
hole.
4.5.3./4.5.4/4.5.5
The two locking pins are inserted in the locking holes
with the release button pressed.
The tool must be pressed gently in the direction of the
clamp while doing so. The pin must lock automatically once
inserted and must not fall out of the locking hole by itself.
The tool is now ready for use.