4.6.1
4.6.2
4.6.3
4.6.4
4.6.5
23
4.6 Riveting Tool Kit RIVKIT UN 2.0 –
Mounting and Intended Use
Three rivet clamps are currently available for use
with the RIVKIT UN 2.0 riveting tool kit:
4.6.1/4.6.2
Screw the riveting tool needed for the working process
into a holder in the rivet clamp as required. Hand-
tighten the riveting head using the special wrenches
provided. Do not use force. Counterhold the nut using
a screwdriver if necessary.
4.6.3/4.6.4
Screw the corresponding counterpart to the rivet insert
into the opposite side of the rivet clamp (plunger rod)
with the spacing bushing and bolt. Tighten by hand.
Do not use force!
Each time rivet inserts are to be installed,
the bolt and die must first be checked for
a correct match!
Refer to the usage matrix in the RIVKIT
UN 2.0 case for details.
Check that the riveting heads are firmly
seated after each riveting operation.
Rivet inserts that have come loose
present a hazard and can lead to
equipment damage.
Rivet clamp
Part No.
Opening depth
NB 40
1
CHR2405
bis 40 mm
NB 115
CHR2204
bis 115 mm
NB 230
CHR2203
230 mm
1
Included in the basic kit