![background image](http://html.mh-extra.com/html/chief/pnp-90-un-2-0/pnp-90-un-2-0_instruction-manual_2601093025.webp)
5.2.1 CHR2403-7
5.2.2
5.2.3
5.2.4
25
5.2 Punching and Calibration of
Holes for Flow Form Rivets
Warning!
The punch will be stuck in the sheets to
be joined after punching. Moving the
riveting tool (hydraulic actuator and
clamp) back and forth frees the punch,
allowing it to be drawn back out of the
sheets.
5.2.1 – 5.2.4
There is no need to drill holes in sheet joints when using
flow form rivets. Punch and punch die (kit CHR2403-
7) enable precise hole punching and simultaneous
calibration of rivet holes.