Form ZCE489
1
Date
2018May15/D
Form ZCE489
Date 2018May15/D
Page 1 of 26
INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4
SIOUX RIVET HAMMERS
(SERIAL D)
RIVET HAMMER SAFETY
Sioux power tools may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Power tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders. Disconnect the hammer from the air line when
changing tools or accessories. Failure of the workpiece, accessories or the inserted tool can cause high velocity projectiles.
For overhead work, wear a safety helmet. Asses the risk to others by operation of the hammer. Ensure the workpiece is
securely fixed. Never operate the hammer unless the inserted tool is retained in the tool with a proper retainer. To avoid injury,
retainer parts must be replaced when they become worn, cracked or distorted.
Flying particles can cause eye injury.
Use of this hammer can expose the operator to hazards.
Hazards include impacts, cuts abrasions and heat. Wear suitable gloves to protect the hands. Operators and maintenance
personnel should be physically able to handle the bulk, weight and power of the tool. Hold the tool correctly, be ready to
counteract normal or sudden movements and have both hands available. Maintain a balanced body position and secure
footing. Release the stop-start device in the case of an interruption of air supply. Use only lubricants suggested by Sioux Tools.
Avoid direct contact with the inserted tool during and after use as it can become hot. Personal protective safety glasses shall be
used. Suitable gloves and protective clothing are recommended.
Use proper protective equipment and posture to prevent injuries.
Use of this hammer can expose the operator to repetitive motion hazards.
When using the hammer, the operator can experience discomfort in the hands, arms, shoulders, neck or other parts of the
body. Use comfortable, not off-balance, posture. Change posture during extended tasks. If the operator experiences persistent
or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensations or stiffness the operator should seek
medical assistance.
Repetitive motion can cause injury.
Accessories used with this hammer can cause injury.
Disconnect the hammer from the air supply before changing tools or accessories. Use only the sizes and types of accessories
and consumables that are recommended by Sioux Tools. Avoid direct contact with the inserted tool during and after use, as it
can become hot or sharp.
Improper consumables and accessories can cause injury.
Be aware of hazards around the workplace.
Be aware of slippery surfaces caused by the use of the tool and avoid trip hazards caused by the air line. Proceed with care in
unfamiliar surroundings. Hidden hazards, such as electricity or other utility lines can exist. The hammer should not be used in
explosive atmospheres and is not insulated against contact with electrical current. Ensure the work area is free from electrical
cables, gas pipes and other hazards.
Hazards around your workplace can cause injury.
Be aware of dust and fumes when using the hammer.
Dust and fumes generated by the hammer can cause ill health. Consider dust created by the tool and existing dust disturbed
by the hammer. Operate and maintain the hammer as recommended in order to minimize dust or fume emissions. Direct the
exhaust to minimize dust disturbance. Control dust at the point of emission. Select, maintain and replace the consumable tool
as recommended to prevent any unnecessary increase in dust or fumes. All integral features or accessories for the collection,
extraction or suppression of dust or fumes should be correctly used and maintained per the manufacturer's instructions. Use
repiratory protection.
Dust and fumes created from use of the hammer can cause injury.
Operation of the hammer can cause noise hazards.
High noise levels can cause hearing damage. Damping may help stop the work surface from "ringing." Hearing protection must
be used. Keep the hammer maintained to prevent an increase in noise. Replace the consumable tool to prevent an increase in
noise. Ensure that the muffler is still installed.
Prolonged exposure to noise can cause hearing loss.
SAVE THESE INSTRUCTIONS!
Read and understand these instructions before operating this tool.
WARNING
When used improperly power tools can create hazardous situations.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Improperly used power tools can cause injury or death.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
