![background image](http://html.mh-extra.com/html/chief/kahuna/kahuna_user-manual_2600332021.webp)
KAHUNA
Users Manual
19
7.
With the clamp tube pinned in the lowest position, install the optional tall anchoring
stands on the anchoring arms. Do not tighten the bolt securing the stand to the arm.
8.
Raise the lift until the stands are just below the anchoring points on the vehicle.
9.
Unpin the anchoring tubes. Raise the tubes and tighten the clamps.
10.
Raise or lower the lift as needed to pin the anchoring tubes at the desired height.
11.
Raise the lift until the anchoring stands start to support the weight of the vehicle.
Tighten the bolts securing the stands to the arms.
12.
Raise the vehicle off the wheel stands and remove the wheel stands. Be sure that the
lift lock has been fully seated in one of the locking positions before working on the
vehicle.
13.
Reverse the previous steps to remove the vehicle from the lift.
Summary of Contents for Kahuna
