![background image](http://html.mh-extra.com/html/chief/kahuna/kahuna_user-manual_2600332017.webp)
KAHUNA
Users Manual
15
Raising Vehicle
Raise the vehicle as follows:
1.
Drive vehicle onto the lift and check if the vehicle is placed in appropriate position.
Relocate vehicle as required.
NOTE:
Some vehicles may have the manufacturer's Service Garage Lift Point locations
identified by triangle shape marks on it's undercarriage (reference ANSI/SAE J2184-1992).
Also, there may be a label located on the right front door lock face showing specific vehicle lift
points. If the specific vehicle lift points are not identified, refer to the "Typical Lift Points"
illustrated herein or the ANSI/ALI Lifting Point Guide included with your lift. ALWAYS follow
the operating instructions supplied with the lift.
Typical Lift Points Diagram
2.
Position the four lift arms at the appropriate places on the deck to allow the arms and
pads to swing underneath the lifting points.
3.
Locate lift pads at appropriate lifting points under vehicle.
4.
Push “up” switch until the lift reaches a position to where the vehicle is just leaving the
ground.
5.
Inspect to make sure there is no interference with any other objects.
6.
Check proper engagement of lifting pads on vehicle. Make sure that vehicle is horizontal
on lift.
7.
Shake moderately at front or rear bumper.
8.
Raise vehicle to desired height then lower onto lock. Make sure that the lift holds the
vehicle in steady position without lowering.
WARNING
Failure to heed the following step can result in serious personal injury.
9.
Disconnect electrical power to make sure lift is not inadvertently activated while working
on vehicle.
Summary of Contents for Kahuna
