KAHUNA
Users Manual
26
Priming the Foot Pump
Occasionally, it may be necessary to prime the foot pump unit. To do this:
1.
Press the release pedal while simultaneously holding down the air intake valve with a
flathead screwdriver. The air intake valve is located under the flat portion of the pedal
as shown in the above photo.
2.
Allow the foot pump to cycle approximately 15 seconds.
3.
Remove the screwdriver and press the flat portion of the pedal.
4.
If the ram extends or pressure builds, the foot pump has been successfully primed. If
not, repeat the procedure.
Summary of Contents for Kahuna
