CHIEF Kahuna, User Manual

Page: 22 / 32

KAHUNA
Users Manual
20
Vector Pulling
Attaching the Vector Pulling Arm to the Deck
The vector pulling arm may be attached anywhere on the outer edge of the deck. The arm
pivots with respect to the deck to achieve virtually any pulling angle.
1.
Determine where and at what angle the pull is to be made. Hang the pulling arm on the
edge of the deck in a location that will produce the desired pull. Secure the pulling arm
to the deck with the bracket and bolts provided.
2. Pivot the pulling arm to the desired angle by pulling up on the spring loaded pin. Be
sure that the pin has fully engaged in the desired pinning location prior to proceeding.
Basic Pulling Setup
1. Prior to usage, make sure male and female quick couplers are free of dirt and other
contamination. Assembly of the hydraulic pneumatic foot pump is covered later in this
section.
CAUTION
When disconnecting hydraulic hose from quick coupler, some fluid spillage
may occur. To avoid personal injury or damage to property, always clean up any hydraulic
fluid spillage from floor or work area.