![background image](http://html1.mh-extra.com/html/chief/avm1/avm1_installation-instructions-manual_2600255007.webp)
AVM1
Installation Instructions
7
Figure 2
(projector not shown for
power supply holder
#10-24" lock nuts x 2
pipe bracket
1
3
2
power supply
display purposes)
Install Power Supply Bracket and Power
Supply
1.
Wrap pipe clamp around projector bracket pipe. (See Figure
2)
2.
Slide power supply into power supply holder. (See Figure 2)
3.
Connect power supply holder to pipe bracket using two #10-
24 lock nuts. (See Figure 2)
4.
Remove Phoenix connector from power supply.
Figure 3
5.
Extend power supply cord using 18AWG wire making sure
it is able to extend from the power source down to the input
box location. (See Figure 3)
6.
Route extended power supply cord through pipe and down
to the input box location. (See Figure 4)
IMPORTANT ! :
DO NOT plug power brick cord into
power source at this time! Make all wiring connections
prior to AC connection and power up!
Figure 4
power supply
18AWG wire to extend
phoenix connector removed
power supply
extended power
supply cord
6