![background image](http://html1.mh-extra.com/html/chief/avm1/avm1_installation-instructions-manual_2600255015.webp)
AVM1
Installation Instructions
15
Figure 24
System Off
Master Power
System On
Master Power
System Off
PROJ
TV
Projector/TV
Power On
Screen Lowers
Proj
TV
Projector/TV
Power Off
Screen Raises
PC 1
VGA + 3.5mm
Audio
DVD
VCR
S-Video or
Com
3.5mm Audio
PC 2
2
nd
VGA +
3.5mm Audio
AUX
AUDIO
Internal audio
via phoenix
connector
VOLUME (N
+1)
Volume -
VOLUME (N -
1)
AVMA Button Layout
AVxRC (remote) Installation
1.
Remove plastic strip at base of AVxRC to engage the
battery. (See Figure 25)
Figure 25
2.
Battery should be ready to operate.
Replacing the AVxRC Battery
NOTE:
The AVxRC is shipped with a 3V lithium battery already
installed. If the battery needs to be replaced, perform
the following steps.
1.
Turn the AVxRC remote over on its back. (See Figure 26)
2.
Pull tab towards the inside of the remote. (See Figure 26)
3.
Pull out battery compartment. (See Figure 26)
4.
Replace battery with a new 3V lithium battery.
Figure 26
remove plastic strip
tab
3