Chevrolet 2010 Camaro Owner'S Manual Download Page 130

Page: 130 / 378

Black plate (48,1)

Chevrolet Camaro Owner Manual - 2010

4-48

Instruments and Controls

Reprogramming a Single
Universal Home Remote
Button

To reprogram any of the three
Universal Home Remote buttons:

1. Press and hold the desired

Universal Home Remote button.
Do not release the button.

2. The indicator light will begin to

flash after 20 seconds. Without
releasing the button, proceed
with Step 1 of the section

“

Programming Universal Home

Remote

”

If you have questions or need
help programming the Universal
Home Remote System,
call 1

‐

800

‐

355

‐

3515 or go to

www.homelink.com. You may also
call the customer assistance phone
number under

Customer Assistance

Offices on page 12

‑

Summary of Contents for 2010 Camaro



























































































































































































































































































































































































Search results

Summary of Contents for 2010 Camaro

Reviews:

Related manuals for 2010 Camaro

Brands by name

Popular brands

Chevrolet 2010 Camaro, Owner'S Manual

Search results

Summary of Contents for 2010 Camaro

Reviews:

Related manuals for 2010 Camaro

Brands by name

Popular brands