Chevrolet 2010 Camaro Owner'S Manual Download Page 312

Page: 312 / 378

Black plate (80,1)

Chevrolet Camaro Owner Manual - 2010

9-80

Vehicle Care

Tools

A. Wheel Wrench

B. Jack Handle Extension

C. Jack

1. The jack and tools are stored

below the spare tire.

Remove the jack from the
retaining bracket.

2. Remove the tool container.

3. Remove the tools from the tool

container.

4. Place the tools next to the tire

being changed.

Removing the Flat Tire and
Installing the Spare Tire

1. If the vehicle has wheel bolt

caps, remove the caps. Store
the caps with the wheel cover.

2. Use the fully extended

wheel wrench to loosen all
the wheel nuts one-half turn
counterclockwise. Do not
remove them.

Summary of Contents for 2010 Camaro



























































































































































































































































































































































































Search results

Summary of Contents for 2010 Camaro

Reviews:

Related manuals for 2010 Camaro

Brands by name

Popular brands

Chevrolet 2010 Camaro, Owner'S Manual

Search results

Summary of Contents for 2010 Camaro

Reviews:

Related manuals for 2010 Camaro

Brands by name

Popular brands