manualshive.com logo in svg

Chevrolet 2010 Camaro, Owner'S Manual

The Chevrolet 2010 Camaro Owner's Manual is an essential guide for every Camaro owner. Whether you need to troubleshoot a problem or want to learn more about your vehicle's features, this comprehensive manual provides detailed instructions. Download your free copy at manualshive.com and unlock the full potential of your Camaro.

Share
Download
background image

Black plate (78,1)

Chevrolet Camaro Owner Manual - 2010

9-78

Vehicle Care

2. Unwrap the air only hose (E)

and the power plug (G).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (E) onto

the tire valve stem by turning it
clockwise until it is tight.

6. Plug the power plug (G) into the

accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See

Power Outlets on

page 4

‑

9

.

If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.

If the vehicle only has a cigarette
lighter, use the cigarette lighter.

Do not pinch the power plug
cord in the door or window.

7. Start the vehicle. The vehicle

must be running while using the
air compressor.

8. Turn the selector switch (B)

counterclockwise to the Air Only
position.

9. Press the on/off (A) button to

turn the compressor on.

The compressor will inflate the
tire with air only.

10. Inflate the tire to the

recommended inflation
pressure using the pressure
gauge (D). The recommended
inflation pressure can be found
on the Tire and Loading
Information label. See

Tire

Pressure on page 9

‑

56

.

The pressure gauge (D) may
read higher than the actual tire
pressure while the compressor
is on. Turn the compressor off
to get an accurate reading.
The compressor may be turned
on/off until the correct pressure
is reached.

11. Press the on/off button (A)

to turn the tire sealant and
compressor kit off.

Be careful while handling the
tire sealant and compressor
kit as it could be warm after
usage.

12. Unplug the power plug (G) from

the accessory power outlet in
the vehicle.

13. Disconnect the air only

hose (E) from the tire
valve stem, by turning it
counterclockwise, and replace
the tire valve stem cap.

14. Replace the air only hose (E)

and the power plug (G) and
cord back in its original
location.

15. Place the equipment in the

original storage location in the
vehicle.

Summary of Contents for 2010 Camaro



























































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Camaro

iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
Cadillac 1993 Seville Owners Literature preview
1993 Seville
Brand: Cadillac Pages: 407
TATA Motors 2013 Nano Owner'S Manual preview
2013 Nano
Brand: TATA Motors Pages: 136
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15
Prorack K577W Fitting Instructions Manual preview
K577W
Brand: Prorack Pages: 15
Brodit ProClip 854676 Quick Start Manual preview
ProClip 854676
Brand: Brodit Pages: 2
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
ULTIMATE SPEED 1188 1525 Instructions For Use And Safety Manuallines preview
1188 1525
Brand: ULTIMATE SPEED Pages: 26
Airstream 2008 Safari Owner'S Manual preview
2008 Safari
Brand: Airstream Pages: 103
Wabtec R-290 Service Manual preview
R-290
Brand: Wabtec Pages: 216
Lincoln 2011 navigator Manual preview
2011 navigator
Brand: Lincoln Pages: 370

Brands by name

Popular brands

Load more brands