Chevrolet 2008 Optra, Owner'S Manual

Page: 243 / 360

Headlamps
To replace a headlamp bulb:
1. Open the hood. See Hood Release on page 5-11
for more information.
2. For wagon models, remove the two bolts from the
top of the headlamp assembly and one nut on the
inside that retains the headlamp assembly.
For hatchback models, remove the four screws and
the radiator grill. Then remove the three bolts
and the headlamp assembly.
3. Disconnect the wiring harness connector from the
rear of the bulb.
4. Remove the headlamp cap (A for the low-beam
or B for the high-beam headlamp) by turning it
counterclockwise.
5. Release the spring that retains the bulb.
6. Remove the old bulb.
7. Install a new bulb.
8. Reverse Steps 1 through 5 to install the headlamp
assembly.
Wagon Models
Hatchback Models
5-41