Chevrolet 2008 Optra, Owner'S Manual

Page: 48 / 360

2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor, if equipped.
Refer to the child restraint instructions and
the following steps:
2.1. Find the top tether anchor.
2.2. For hatchback models, remove the cargo
shade before installing the top tether.
The cargo shade should remain off while
the top tether anchor is in use.
2.3. Squeeze and pull the front part of the cover,
if there is one, to access the anchors.
For the center position in a wagon model,
flip the cover on the ceiling to access
the anchor.
2.4. Raise the headrest or head restraint if the
desired seating position has an adjustable
headrest or head restraint. See Head
Restraints on page 1-7.
2.5. Route and tighten the top tether according to
your child restraint instructions and the
following instructions:
If the position you are
using does not have a
headrest or head restraint
and you are using a
single tether, route the
tether over the seatback.
If the position you are
using does not have a
headrest or head restraint
and you are using a
dual tether, route the tether
over the seatback.
1-44