Chevrolet 2008 Optra Owner'S Manual Download Page 135

Page: 135 / 360

Passenger Compartment Air Filter

Your vehicle may have a passenger compartment
air filter. It is located on the passenger side under the
glove box.

The filter traps most of the pollen from air entering the
module. The filter may need to be changed periodically.

To change the passenger compartment air filter, use
the following steps:

1. Remove the four screws from the filter cover

located below the glove box.

2. Remove the filter cover.

3. Remove the old passenger compartment air filter.

4. Reverse the steps to install the new air filter.

Make sure that the new filter is inserted to the
correct air flow.

3-23

Summary of Contents for 2008 Optra









































































































































































































































































































































































Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands

Chevrolet 2008 Optra, Owner'S Manual

Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands