manualshive.com logo in svg

Chevrolet 2008 Optra, Owner'S Manual

The Chevrolet 2008 Optra Owner's Manual is a comprehensive guide for Chevy owners, providing essential information and instructions for maintenance and operation. Available for free download at manualshive.com, this manual is a must-have resource to fully understand and maximize your Optra's features and performance.

Share
Download
background image

Speedometer and Odometer

The speedometer lets you see your vehicle’s speed
in both miles per hour (mph) and kilometers per
hour (km/h).

The odometer shows how far your vehicle has been
driven in kilometers.

Trip Odometer

The trip odometer can record the number of kilometers
traveled for up to two trips.

You can cycle between the odometer and trip
odometers A and B by pressing the reset button located
in the lower right area of the speedometer. By pressing
the reset button, you can tell how many kilometers
have been recorded on either Trip A or Trip B since you
last set the trip odometer back to zero.

To reset each trip odometer to zero, press and hold the
reset button. The reset button resets only the trip
odometer that is displayed. Each trip odometer must be
reset individually.

Tachometer

The tachometer
displays your engine
speed in revolutions
per minute (rpm).

Notice: If you operate the engine with the
tachometer in the shaded warning area, your vehicle
could be damaged, and the damages would not
be covered by your warranty. Do not operate
the engine with the tachometer in the shaded
warning area.

3-26

Summary of Contents for 2008 Optra









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Optra

Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Rugged Ridge 11252.51 Installation Instructions preview
11252.51
Brand: Rugged Ridge Pages: 3
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
Volvo XC60 2014 Wiring Diagrams preview
XC60 2014
Brand: Volvo Pages: 362
v.link CI-VL2-PC-HSD Manual preview
CI-VL2-PC-HSD
Brand: v.link Pages: 19

Brands by name

Popular brands

Load more brands