manualshive.com logo in svg

Chevrolet 2008 Optra, Owner'S Manual

The Chevrolet 2008 Optra Owner's Manual is a comprehensive guide for Chevy owners, providing essential information and instructions for maintenance and operation. Available for free download at manualshive.com, this manual is a must-have resource to fully understand and maximize your Optra's features and performance.

Share
Download
background image

Parking Brake

The parking brake lever is located between the
bucket seats.

To set the parking brake, hold the brake pedal down
and pull up on the parking brake lever. If the ignition is
on, the brake system warning light will come on.
See Brake System Warning Light on page 3-31.

To release the parking brake, hold the brake pedal
down. Pull the parking brake lever up until you can press
the release button. Hold the release button in as you
move the brake lever all the way down.

Notice: Driving with the parking brake on can
overheat the brake system and cause premature
wear or damage to brake system parts. Make sure
that the parking brake is fully released and the brake
warning light is off before driving.

2-28

Summary of Contents for 2008 Optra









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Optra

Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
CTEK D250S Dual Manual preview
D250S Dual
Brand: CTEK Pages: 84
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
TomTom LINK 105 Installation Manual preview
LINK 105
Brand: TomTom Pages: 22
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Scosche MAGICGRIP MGQDWD-CPO Instructions Manual preview
MAGICGRIP MGQDWD-CPO
Brand: Scosche Pages: 12
Subaru 2015 Forester Quick Reference Manual preview
2015 Forester
Brand: Subaru Pages: 16
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Xforce PR-104 User Manual preview
PR-104
Brand: Xforce Pages: 11
Metra Electronics 99-3305 Installation Instructions Manual preview
99-3305
Brand: Metra Electronics Pages: 12
Ranger design C24-DL Installation Manual preview
C24-DL
Brand: Ranger design Pages: 14
Volvo XC40 RECHARGE Retailer Pairing Manual preview
XC40 RECHARGE
Brand: Volvo Pages: 5
Whispbar K477W Fitting Instructions Manual preview
K477W
Brand: Whispbar Pages: 15
Chevrolet El Camino 1983 Owner'S Manual preview
El Camino 1983
Brand: Chevrolet Pages: 103
Peak PKC0BJ Owner'S Manual preview
PKC0BJ
Brand: Peak Pages: 8
Renault Kangoo Manual preview
Kangoo
Brand: Renault Pages: 239

Brands by name

Popular brands

Load more brands