Chevrolet 2008 Optra Owner'S Manual Download Page 248

Page: 248 / 360

Taillamps, Turn Signal, and
Stoplamps (Hatchback)

To replace one of these bulbs:

1. Open the liftgate. See Liftgate on page 2-10 for

more information.

2. Remove the two screws and the taillamp assembly.

3. Remove the bulb socket by turning it

counterclockwise from the taillamp assembly.

4. Remove the bulb from the socket by pressing the

bulb and turning it counterclockwise.

5. Install the appropriate new bulb into the socket.
6. Reverse Steps 1 through 3 to install the lamp

assembly.

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps (Wagon)

To replace one of these bulbs:

1. Open the liftgate. See Liftgate on page 2-10 for

more information.

2. Remove the two screws from the taillamp assembly.
3. Remove the taillamp assembly from the vehicle.
4. Remove the bulb socket by turning it

counterclockwise from the taillamp assembly.

5. Remove the bulb from the socket by pressing the

bulb and turning it counterclockwise.

5-46

Summary of Contents for 2008 Optra









































































































































































































































































































































































Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands

Chevrolet 2008 Optra, Owner'S Manual

Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands