Chevrolet 2008 Optra Owner'S Manual Download Page 249

Page: 249 / 360

6. Install the appropriate new bulb into the socket.
7. Reverse Steps 1 through 4 to install the lamp

assembly.

Taillamps, Stoplamps and Back-up
Lamps (Hatchback)

To replace one of these bulbs:

1. Open the liftgate. See Liftgate on page 2-10 for

more information.

2. Remove the protective cover.

3. Remove the bulb socket by turning it

counterclockwise.

4. Remove the bulb from the socket by pressing the

bulb and turning it counterclockwise.

5. Install the appropriate new bulb into the socket.
6. Reinstall the protective cover.

License Plate Lamp

To replace one of these bulbs:

1. Remove the two screws holding each of the license

plate lamps.

2. Turn and pull the license plate lamp toward you

through the opening.

5-47

Summary of Contents for 2008 Optra









































































































































































































































































































































































Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands

Chevrolet 2008 Optra, Owner'S Manual

Search results

Summary of Contents for 2008 Optra

Reviews:

Related manuals for 2008 Optra

Brands by name

Popular brands